After the good results of the Moto series of Android smartphones by Google, the company decided to release the LTE enabled variant of the Moto G. The smartphone has ruled the markets over time & turned out to be a strong challenger to others with its superb configuration in an very affordable price. As its predecessor, the Moto G 4G LTE model beholds the similar components of Snapdragon 400 Quad-core 1.2 GHz Cortex-A7 CPU, Adreno 305 GPU, a 4.5 inches IPS LCD Gorilla Glass screen with KitKat Operating system running.
People are here day-to-day, seeking techniques to explore their freshly bought or even older smartphones, so that they can perform much better. This could be done by Rooting your gadget, so that you can alter the Android Operating system installed on your device and allow it a little push. You may also need a operating Custom Recovery for your Android, if you are willing to Install a Custom ROM or a Kernel. For the gadgets by Google, its the most easiest & could be done within a several commands. All it needs is some simple knowledge of your PC’s Command Prompt window. Lets start to Install TWRP Recovery & Root Moto G 4G LTE.
Rooting voids your device warranty. DroidWays will not be held responsible for any kind lose or damage to your device. Perform anything at your own risk.
Preps Before Rooting:-
Now, before you go ahead with the guidance, its really important to fulfill some pre-needsfor the procedure. Get them done & move on.
1) Install Appropriate USB Drivers
2) Install Android SDK
3) USB data wire
4) Enable USB debugging
5) Charge your Moto G over 60% battery level to avoid any uncertain shutdowns while in the process
6) Backup all things, this includes your storage, SMS, contacts etc.
Install TWRP Recovery Step by Step:-
Install a Custom Recovery is an important part if you wish to Install a Custom ROM on your Moto G. Even when you want to Root Moto G 4G LTE, you’ll need this installed.
Step No 1: Get the TWRP recovery image file: twrp-188.8.131.52-peregrine-201407161845.img
Step No 2: Open the position where the Recovery image file has been downloaded. Inside that folder click SHIFT key & right-click on an empty space, a pop-up will show up. Select Open command window here.
Step No 3: Connect the Moto G to the PC via USB data cable.
Step No 4: Type the following command in the CMD window to reboot your Moto G into
adb reboot fastboot
Step No 5: Once you observe your device in bootloader/fastboot mode, type the command to begin the flashing process of TWRP recovery:
fastboot flash recovery twrp-184.108.40.206-peregrine-201407161845.img
Step No 6: The process will take just a few sec to finish. After that enter the below command to reboot your device:
Now you have your TWRP recovery Installed on your newly Moto G 4G LTE Model.
Guidelines to Root Moto G:-
1) Download Chainfire’s SuperSU root file: UPDATE-SuperSU-v2.01.zip
2) Connect the Moto G to the PC via USB data cable.
3) Move the downloaded file to the device’s storage.
4) Open a command prompt window and type in the following command to reboot your device into TWRP recovery mode:
adb reboot recovery
5) Touch Install, browse and pick the UPDATE-SuperSU-v2.01.zip.
6) Now, swipe the button on the bottom part to start the flashing process.
7) It will take a few secs, now tap on Reboot device.
Congratulation! You have been successful to Install TWRP and Root Moto G 4G LTE.